The Pixboom Spark: over 1,000fps in 4K from a compact Super 35 global shutter cinema camera.
operator required

Pixboom Spark High-Speed Camera

Capture extreme slow motion with the Pixboom Spark. Its 14.2MP Super 35 global shutter sensor records up to 1,171 fps in 4K and 2,182 fps in 2K, with triple base ISO and 13+ stops of dynamic range.

The compact 1.1 kg aluminum body is small enough to fly on a drone, gimbal or arm car, and its interchangeable locking E / PL mount lets you use almost any cinema lens.

Key Features

Over 1,000 fps in 4K, 2,000+ fps in 2K
Super 35 Global Shutter, 13+ Stops
Triple Base ISO
Pixboom Pro Card: 10 GB/s, Instant USB-C Offload
3.5" Touchscreen and Wi-Fi App Control

The Pixboom Spark is a compact high-speed cinema camera built around a 14.2MP Super 35 back-side illuminated global shutter sensor. It shoots 4.6K open gate at up to 670 fps, 4K at up to 887 fps (16:9) or 1,171 fps (2.37:1), and 2K at up to 2,182 fps, so even the fastest action plays back smooth, sharp and free of rolling-shutter skew.

Footage is recorded in lossless Pixboom RAW to the removable Pixboom Pro Card at up to 10 GB/s, and recording time is limited only by the card. A 2,000-frame pre-record buffer means you never miss the moment, and the card offloads straight over USB-C at 20 Gbps without a card reader.

On set, the Spark runs from a V-mount battery or 15–24V DC, monitors over 12G-SDI and HDMI 2.0, and can be operated from its 3.5" touchscreen or remotely over Wi-Fi with the Pixboom app. At 108 × 110 × 130 mm and under 1.1 kg, it fits on drones, gimbals, arm cars and crash rigs where larger high-speed cameras can't go.

  • V-Mount Batteries
  • SmallRig Cage
  • 2x Pixboom Pro Cards
  • PL Mount (E-mount also included)
  • Monitor
  • Sensor: 14.2MP Super 35 global shutter BSI CMOS (25.34 x 16.90 mm)
  • Max resolution: 4608 x 3072 (4.6K open gate 3:2)
  • Frame rates: 670 fps 4.6K 3:2 | 887 fps 4K 16:9 | 1,171 fps 4K 2.37:1 | 1,724 fps 2K 16:9 | 2,182 fps 2K 2.37:1
  • Dynamic range: 13+ stops
  • ISO: Triple base ISO
  • Recording: Pixboom lossless RAW, up to 10 GB/s
  • Pre-record buffer: 2,000 frames
  • Media: Removable Pixboom Pro Card, USB-C 20 Gbps offload
  • Lens mount: Interchangeable locking electronic E / PL mount
  • Outputs: 12G-SDI and HDMI 2.0 (up to 4K 60p)
  • Other I/O: USB-C, 9-pin EXT (genlock, timecode, GPIO), dual-band Wi-Fi
  • Display: 3.5" 6.22M-dot touchscreen
  • Power: Integrated V-mount plate, 15–24V DC in
  • Dimensions: 108 x 110 x 130 mm
  • Weight: Under 1.1 kg
  • Operating temperature: 0°C to 40°C